1. The size of the heat pipe can be made: 1) Diameter: Φ5, Φ6, Φ8 (mm) 2) The length of the effective end of the heat pipe: MAX350mmL, Min50mmL 2. Heating method: double-sided heating, high-grade red copper processing and molding, heating length 75mmL heating temperature setting range (room temperature to 150 ℃), mold can be quickly replaced (one set of Φ5 mold is included) 3. Press-fit method: The press-fit mold is processed and formed by SKDll, and the heat-treated HRC (45∼48°C) mold can be quickly replaced (our company provides the external shape and hole size of the press-fit mold to the customer, and the customer depends on the shape of the press-fit mold. self-made) 4. Each workstation can produce 1 heat pipe, a total of 4 workstations 5. There are two test modes to choose from: l) Temperature mode: set the time and temperature parameters to determine NG or OK, if OK, then perform clamping and cutting action (the temperature measurement point is above the pressing mold, and the tube is reduced. end) 2) Time mode: adjust the setting value of the heating time, when the heating time reaches the setting value, pinch and cut the pipe 6. Use the hydraulic cylinder to perform the pressing action of the copper tube, and use the cylinder to cut the remaining copper head material. After completion, there is a cylinder below to automatically eject the copper tube, and manually take the copper tube (the hydraulic power pack includes the motor, cooling fan, oil Cylinder, hydraulic solenoid valve, fuel tank, etc.) 7. Controlled by man-machine interface digital display time, PID digital display temperature with SSR contactless switch 8. It can be set to calculate the number of clamping times. When the set number of times is reached, the machine does not perform any action, and the man-machine interface displays a warning. 9. When an abnormal situation occurs, there is a buzzer and a red indicator light as an alarm device 10. Equipment wearing parts: the die and punch for pressing, which should be replaced by the customer according to the number of times of pressing 11. Machine size: 1150mm(L)x950mm(W)x2000mm(H) 12. Working height: 1100mm(H) 13. Voltage: 380V 3-phase 4-wire 50HZ 14. Full load power consumption: 3KW 15. Air pressure source: more than 6Kg/c㎡, dry exercise to clean the air 16. Use oil: R32 lubricating oil