1. Specifications of working tube: ￠2mm~￠20mm, change the corresponding fixture for different specifications, and the equipment will be random with 1 set of specifications (customer specified) 2. Cutting length: 10mm~1000mm, the longest single stroke is 500mm 3. Wall thickness of cutting pipe: more than 0.1mm 4. Tube cutting accuracy: ±0.08mm 5. Pipe cutting method: horizontal movement of saw blade and flat cutting method 6. Maximum water pressure: 1 MPA 7. Dimensions: length 1800mmX height 2100mmX width 950mm 8. Power supply voltage: 380V 50HZ 9. Maximum hydraulic pressure: 5 MPA 10. Power: 5KW 11. Maximum clamping force: 200KG 12. Maximum single stroke: 550mm

1. Working tube specifications: D4~D10 (replace corresponding fixtures for different specifications, the equipment is only equipped with one specification fixture) 2. Working tube length: 90mm~650mm (cut tube length, short tube needs to be replaced with corresponding mold) 3. Working efficiency PPH: about 500~700 pieces (depending on the different pipes, the length of the neck is different, and the efficiency is different) 4. Staffing: 1 person can work 4 machines or more at the same time 5. Operation method: cylinder feeds into the shrinkage, high-speed spindle air-cooled motor 4.5 Kw spindle motor hollow type, automatic feeding, automatic shrinking, automatic receiving. 6. Motor parameters: 4.5KW, the maximum speed is 18000R/Min (speed adjustable) equipped with inverter 7. Neck length: within 50mm 8. Power supply voltage 380V, 4.5KW 9. Working air source: 5~6Kg/cm 10. Equipment size: length 1200mm width 660mm height 1550mm 11. Equipment rack: welding rack, surface paint sky blue 12. Equipment combination: storage rack, feeding mechanism, positioning group, pressure tube group, necking group, receiving group, control group, rack group 13. Equipment weight: about 150Kg 14. Equipment fixtures: precise positioning and quick replacement of mold fixtures to ensure concentricity of shrinking heads

1. Specification of working tube: ￠5mm~￠8mm 2. Working tube length: 120mm~550mm 3. Working efficiency PPH: 1000~1200 pieces (0.2 wall thickness length 300mm) 4. Manual operation: 25 pieces/disk 5. Including workbench + cover

1. Equipment name: hood furnace (sintering furnace) 2. Applicable products: copper metal substrate heat pipe sintering, annealing heat treatment 3. Use of electricity: three-phase 380V, 60Kw 4. Operating gas: N2 nitrogen, 95% N2 + 5% H2 mixed gas 5. Operating temperature: commonly used around 650~980℃, rated temperature 980℃ 6. Heating time: normal temperature to 980℃/90~120 minutes up to (empty furnace test) 7. Installation area: length 2300mm width 2300mm height 3800mm 8. Furnace size: length 1750mm width 1560mm height 3650mm (upper and lower section design) 9. Furnace hood size: diameter 500mm height 1510mm thickness 5mm 10. Effective volume of furnace hood; diameter 450mm height 1200mm 11. Furnace size: inner diameter 600mm, outer diameter 900mm, height 1300mm 12. Furnace material: refractory brick stacked 18-layer heating wire, which can be quickly disassembled 13. Furnace temperature control method: six zones in the furnace control the heating temperature, thermocouple K type 14. Furnace temperature control method: six zones in the furnace monitor the heating temperature, thermocouple S type 15. Lifting method: using electro-hydraulic lifting platform, stable, safe, effective load-bearing 2.0T 16. Gas inlet and outlet method: gas inlet and outlet on both sides of the furnace hood, and a space is reserved in the middle for laying down for sintering. 17. Gas switching: can automatically switch N2 nitrogen & mixed gas 18. Control box: integrated fixed installation on the furnace side 19. Equipment rack: square tube welding rack, the surface is painted gray and white

1. Working tube specifications: D4~D8 (replace the corresponding fixtures for different specifications, the equipment is only equipped with one specification fixture) 2. Working tube length: center rod + tube length 160~600mm, (replace the corresponding fixture for different center rods) 3. Equipment PPH: 700~800 pieces 4. Operation product: suitable for pulling out the round rod of the all-powder heat pipe, the central rod is exposed by 55~100mm 5. The receiving trough is divided into NG & OK products and collected 6. Staffing: 1 person can work 4 machines or more at the same time 7. Power supply voltage 220V, 1 KW 8. Working air source: 5~6Kg/cm 9. Equipment size: length 1600mm width 700mm height 1600mm 10. Equipment rack: welding rack, surface paint sky blue 11. Equipment combination: storage rack, feeding mechanism, positioning group, pinch group, pulling rod group, receiving group, control group, rack group 12. Equipment weight: about 500Kg

1. Working tube specifications: D6~D10 (replace the corresponding fixture for different specifications, the equipment is only equipped with one specification fixture) 2. Length of working tube: 80mm~450mm (standard tube after necking, short tube needs to be replaced with corresponding mold) 3. Operation method: four-piece hitting method, shrinking 4. Motor connection: direct connection 5. Power supply voltage: 380V, 2.2KW 6. Equipment size: length 1000mm width 500mm height 1350mm 7. Equipment rack: square tube welding rack, surface paint sky blue 8. Equipment weight: about 250Kg

1. Working tube specifications: D6~D10 (replace the corresponding fixture for different specifications, the equipment is only equipped with one specification fixture) 2. Length of working tube: 80mm~450mm (standard tube after necking, short tube needs to be replaced with corresponding mold) 3. Operation method: four-piece hitting method, shrinking 4. Motor connection: direct connection 5. Power supply voltage: 380V, 2.2KW 6. Equipment size: length 1000mm width 500mm height 1350mm 7. Equipment rack: square tube welding rack, surface paint sky blue 8. Equipment weight: about 250Kg

First, the main parameters of the equipment: •1. Specification of working tube: sintered tube ￠5mm~￠10 mm, wall thickness 0.3~0.5mm (except single/double side powder); •2. Length of working pipe: 130mm~500mm (total length of pipe body); •3. Work station: automatic tail reduction + roll straight + tail reduction detection + spot welding + spot welding detection; •4. Working efficiency UPH: about 700 pieces (depending on tube thickness and tail length, the efficiency is different); •5. Operation features: automatic detection after shrinking and automatic detection after spot welding; •6. Operational yield: 99.5%; •7. Wire change time: within 30 minutes for the same pipe diameter and the same shrinkage diameter, and within 60 minutes for different pipe diameters with different shrinkage diameters; •8. Power supply voltage 380V, power: about 40KW •9. Working air pressure: 6~7Kg/cm •10. Equipment size: length 2900mm width 1300mm height 2400mm •12. Equipment rack: square tube welding rack, the surface paint can be customized according to customers, generally electric box gray 13. Equipment weight: about 1200Kg