Product Center
image-(3).png
+
  • image-(3).png

Automatic rigid pipe flaring machine

1. Mandrel tube specifications: D4–D10 (replace with the corresponding fixture for each specification; the equipment is equipped with only one type of fixture). 2. Mandrel tube length: 90 mm–650 mm (cutting length; shorter tubes require replacement of the corresponding die). 3. Production efficiency: approximately 500–700 pieces per hour (efficiency varies depending on tube material and necking length). 4. Personnel requirements: one operator can simultaneously run four or more machines. 5. Operating mode: pneumatic cylinder‑driven necking, high‑speed spindle with air‑cooled 4.5 kW motor, hollow‑shaft design; automatic feeding, automatic necking, and automatic material collection. 6. Motor specifications: 4.5 kW, maximum speed 18,000 rpm (speed adjustable), equipped with a frequency inverter. 7. Necking length: within 50 mm. 8. Power supply: 380 V, 4.5 kW. 9. Air supply required: 5–6 kg/cm². 10. Equipment dimensions: 1,200 mm long × 660 mm wide × 1,550 mm high. 11. Equipment frame: welded steel structure with sky-blue baked finish. 12. Equipment configuration: material storage rack, feeding mechanism, positioning unit, pipe‑pressing unit, necking unit, material‑collection unit, control system, and frame assembly. 13. Equipment weight: approximately 150 kg. 14. Tooling: precision positioning and quick‑change dies to ensure concentricity of the necked end.

Keywords:

Category:

Pipe cutting / Hard pipe reduction

+86-0760-86699625

Request Message

1. Workpiece tube specifications: D4–D10 (replace with the corresponding fixture for each specification; the equipment is equipped with only one type of fixture)

2. Mandrel length: 90 mm to 650 mm (cutting tube length; for shorter tubes, the corresponding die must be replaced)

3. Working efficiency (PPH): approximately 500–700 pieces per hour (varies depending on the pipe material and the length of the reduced‑diameter section).

4. Staffing: One person can operate four or more machines simultaneously.

5. Operating mode: pneumatic cylinder for mandrel feeding and retraction, high-speed air-cooled spindle motor with 4.5 kW output and a hollow‑shank design, automatic material feeding, automatic mandrel retraction, and automatic material collection.

6. Motor specifications: 4.5 kW, maximum speed 18,000 rpm (speed adjustable), equipped with a variable-frequency drive.

7. Necking length: within 50 mm

8. Power supply voltage: 380 V, 4.5 kW

9. Operating air supply: 5–6 kg/cm²

10. Equipment dimensions: Length 1200 mm, Width 660 mm, Height 1550 mm.

11. Equipment Rack: Welded frame with a sky-blue baked finish.

12. Equipment Configuration: Material Storage Rack, Feeding Mechanism, Positioning Unit, Tube-Pressing Unit, Neck-Reducing Unit, Material Collection Unit, Control System, and Frame Assembly

13. Equipment weight: approximately 150 kg

14. Equipment and Fixtures: Precise positioning and rapid mold‑fixture changes ensure concentricity of the neck‑down section.

Request Message

If you are interested in our products, please contact us—we will be delighted to serve you!

Submit
%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86
Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home